WIRECAST 5.0 PRO
WIRECAST 5.0 FREE
WIRECAST 5.0 MAC
WIRECAST 5.0 WINDOWS

Wirecast Pro now accepts RTMP, RTMPS, RTMP(e), RTSP, HTTP, and MMS streams directly with properĬredentials and stream keys (if required).

WIRECAST 5.0 FREE

Wirecast Cam, a free iOS app for Wirecast 6, lets you use any iPhone (4s or newer) or iPad on your WiFi network as an ingest source into Wirecast.Most Standard Definition (SD) and High Definition (HD) consumer, 'prosumer' and professional-grade cameras, decks and video sources with composite, S-video, Firewire, component, SDI, HD-SDI, or HDMI outputs should work with Wirecast through a qualified capture card. Configure Wirecast Encoder v4.Composite, S-Video, DV/HDV, Component, SDI, HD-SDI, HDMI Sources.Configure Wirecast Encoder v4.0 (Windows Media).How to: Configure Wirecast v4.0 with Flash.

WIRECAST 5.0 WINDOWS

How to: Obtain the embedded player for Windows Media and Flash Live.

How to: Configure Wirecast V5.0 with Windows Media.

Step 21 - When ready, all you need to do now is click on the Stream button located on the left side of the encoder. Step 20 - And make sure that you its selected and click OK. Step 19 - You can also click on the Gear button located on the top. If it already has a check mark, leave it like it is. Step 18 - On the Wirecast menu bar, click “Output” and the “Start / Stop Broadcasting” and select the Flash RTMP that we configured previously. Step 17 - When ready, click on the arrow button located in the middles on the encoder. Step 16 - Select the source you have just added so this can appear on the preview box of Wirecast. Step 15 - Make your changes as needed on the source device settings you have selected and save when done. Step 14 - We will need to add the source or device needed. Step 13 - Below the Preview box on Wirecast, move your mouse over the “+” sign and select your desired source. Step 12 - Review and click OK when you are done to save your setup. Step 11 - Proceed to name your preset, Click OK. Step 10 - Once you are satisfied with your changes, please click on the “Save As” button located below the Encoder Preset window.

To get more information on these settings, please go to the following link: Wirecast Support (Go to Wirecast 5, Output Settings, Encoder Presets and Flash Encoder Presets.) Step 9 - You might want to play with the rest of the settings to see what is best for your streaming. Step 8 - On the “Average bit rate” field, enter the bitrate you wish you use. Step 7 - This will bring up the encoder preset window. Step 6 - Now, to change the bitrate, click on the gear besides the “Encoding” setting and click on “View Details”. Stream: This will be located on your Channel Configuration page on the “Stream” field.

Address: This will be located on your Channel Configuration page on the “FMS URL” field.

Encoding: This can be chosen as desired but keep in mind that here, you will be able to determine the bitrate that you want to use.

Destination: For Flash, it should be RTMP Server.

Name: You can name it however you want.

Step 5 - You should now be able to enter the required data. Please refer to the following solution if you haven’t created a channel: How to: Setup your service This is to bring up the channel configuration page.

Step 4 - Now, go to your NetroMedia HOME account portal and click on the Flash Channel or publishing point that you have created. Step 3 - Then “Select an Output Destination” window will come up and will default to RTMP Server selection so just click on OK. Step 2 - On the Menu bar, click on “Output”, then on “Output Settings…” Step 1 - Open Wirecast from the start menu or from a shortcut on your desktop if you have it. We will be covering a basic setup on this solution, we will not be covering any advanced features.

WIRECAST 5.0 MAC

This article also assumes that you already have Wirecast installed on your desktop with either Mac or Windows Operating systems. The purpose of this article is to show you the procedure that needs to be taken to successfully configure Wirecast V5.0 with Flash using NetroMedia services. Para Español, de clic aqui How to: Configure Wirecast V5.0 with Flash How to: Configure Wirecast V5.0 with Flash

Wirecast 5.0